HAPP25: $3900 Sale! 4 Post 4T Hoist, 2m lift, WHS approved

Happ25 Row, best 4 post hoist in Australia

BACK ORDER – NEXT SHIPMENT DUE AUGUST (taking deposits as these sell out before they hit our shores!)

Check out one of our valued customers videos on our 4 post hoist: 

https://www.youtube.com/shorts/pXv265jmWRQ?sttick=0

BIGGEST SALE EVER!  Receive $490 off this 4 post hoist

We are not only committed to our quality, but also to our customers. We have managed to negotiate a price with our partners, that we would like to pass on to YOU 🙂
Our Happ25, which is normally $4390, will be on sale until we deem otherwise, for $3900. THAT IS A GENUINE LIMITED SAVING OF $490. This hoist has been put through Australian Standards compliance with all the actual required testing and is being sold at the same price as companies that have not done this.

ALL OUR HOISTS ARE GST INCLUSIVE and offer a FIVE YEAR STRUCTURAL WARRANTY*

We are proud to announce that after extensive detailed structural analysis, cost and time, the HAPP25 model is available with Australian Standards certification and can easily be registered with WH&S by HAPP for your reassurance. WH&S require design registration and formal processes and procedures to be followed in the workplace. Our WH&S package includes the registration documents, the necessary procedures and log books to implement a documented operation / maintenance of the hoist.

We still want this 4 tonne hoist to be affordable hoist for customers who do not  require the WH&S kit, so we have split the cost of the HAPP25 – the purchase of the hoist and/or the WH&S kit.

The happ25 includes 3 drip trays complimentary, and a tool tray which can either hold your tools between the runways, or be the base of your jacking beam if you want to use your own standard bottle jack. We also sell both the hand pump model and air pneumatic jacking beams – mini scissor lifts.

Description:

We are now the sole Australian trading company for these quality hoists for this large multi-national company. We are often asked why our 4 post hoists are more expensive than just the normal ones bought out by other companies from China. Here is exactly why – you make your own choice 🙂 :

  • All lifts are inspected TWICE by external quality assurance engineers during the production assembly.
  • Our steel columns are 5mm which is thicker than what is required by WH&S. All other companies are only at 4mm.
  • We have included TWO extra strengthening beams under EACH runway per Australian Standards.
  • We have TRIPLE safety mechanisms that are now required for the latest Australian Standards testing.
  • Our locking mechanisms are every 130mm, not every 150mm like other companies.
  • Our cables are 12.5mm thick. They have been tested against Australian Standards requirements in NATA registered laboratories in Australia and exceed the Australian Standards requirements.

The HAPP 25 four post hoist, with hydraulic lift is ideal for both businesses and the home enthusiasts that not only want a hoist to work on their cars, but also want to increase their parking spots. It is our longest hoist, making it suitable for any large based vehicle.

HAPP25 Porche

HAPP25 Porche

Features:

  • Large ultra strong 12.5mm lift cables as used on our 5T hoist
  • Dual 90x60mm extra strength beams under each runway per engineer review
  • 5 mm ultra thick columns – thicker than engineer requirements
  • Cable and hydraulic load balancing
  • Automatic safety locks
  • Plastic powder coat finish
  • Release all column safeties, raise and lower from single point
  • Ratchet safety with 100mm increments
  • Max runway height 2000m, runway thickness 100mm
  • Carriages move synchronously
  • Hydraulic cylinder – cable drive, stable lifting and lowering
  • Dynamically tested with 125% of rated capacity and static test with 150% of rated capacity
  • CE certified (Europe and USA)
  • Removable dolly wheels allow moving of lift – this is the optional castor wheel kit
  • Drip trays provided to protect cars underneath
  • Huge heavy duty part tray provided standard
  • Steel lock pins for extra safety when storing cars at full height for extended periods
  • Tru-bolt included with hoist, loxon anchor bolts can be used for easy moving hoist or M16 concrete screws
  • Connector to external limit switch
  • Access to HAPP customer group buy plan

JB20 Air Pneumatic Jacking Beam

Specifications:

  • Load Capacity – 4000kgs
  • PV1 Power Pack Happ 240v / 15 ampLifting Height – 2000mm
  • Outer dimensions (LxWxH) – 4580 x 2845 x 2318mm
  • Pillar width – 2650mm
  • Width of rack – 2515mm
  • Net weight – 850kg
  • Package weight – 880kg
  • Packed measurements: 470cm x 73cm x 55cm
  • Rise/Drop time: <50sec/>20sec
  • CE approved Hydraulic Power Pack
  • Motor Capacity – 240V, Single phase or 3 Phase 415V (3 phase motor is an additional $150)
  • Power of motor – 2.2kw
  • 15 amp plug supplied
Note:
HAPP hoists come standard with steel oil containers where included. Plastic containers as shown can be provided if so desired. All HAPP hoists have ratchet safety latches in the columns, users only work with vehicles when the mechanical safety latches are engaged allowing safe work at any lift height.

Optional items:

  • JB10 Hand pump jacking beam – $1095.00 (gst inclusive) – 2T capacity – photo above of JB20
  • JB20 Air pneumatic jacking beam – $1295.00 (gst inclusive) – 2T capacity – photo above of JB20
  • Castor Wheel kit to move the hoist around – $180.00 (gst inclusive)
Dimensions are informative only, do not pre drill anchor bolts based on drawing
Important: EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards.  Our catalogue shows this picture on EVERY CAR LIFT. BEWARE: Registration with WH&S in states other than Queensland does NOT mean this testing has been done, it merely registers a design.

Price

RRP $4390, (currently $3900.00, gst inclusive) PLUS Pickup / Delivery (See below)
$200 for our A.S. kit (this includes log books, a certificate, and your registration papers)
Please see T’s & C’s below as there is a $20 warehouse fee on all orders and 1.7% card fees.

Important – HAPP Car Lift Safety & Testing

Every HAPP car lift is designed and tested in Queensland by Australian professional engineers in accordance with Australian Standards, using state-of-the-art technology.

The multi-coloured images on our lift specifications are direct excerpts from engineers’ reports, proving the rigorous testing behind every lift.

We take quality seriously: if you don’t see this drawing on your product, it has not been tested to Australian Standards. Our catalogue displays this verification on every car lift we sell.

Important: Design registration with WH&S in states outside Queensland does not guarantee testing—it only registers a design. Trust HAPP for lifts professionally engineered and verified in Australia.

HAPP Australia – Pickup/Delivery, Terms, Warranty & About Us

Pickup & Delivery

We offer competitive freight rates to all states across Australia. You’re also welcome to pick up your order directly from our warehouse in Hendra, QLD, or organise your own freight.

Please note: a $20 warehouse fee applies to all orders.

For a freight quote or more information, contact us directly:

  • Office: 0439 833 497

  • Or email: customerservice@happ.com.au

  • Installation of your hoist can be arranged by you or us at an extra cost as our recommended installers are third party to us.

We’re happy to help make delivery simple and straightforward!

Terms & Conditions

  • $20 warehouse fee applies to all orders.

  • Cards accepted/payments: 1.7% surcharge on Visa & Mastercard (goes directly to the bank, not us).

  • BUYHAPP.com.au will have fees if paying by Paypal or card as above.

Banking Questions:

Specifications, prices and complimentary accessories are subject to change without notice. Always check with us for the most current information.

Parts & Hoist Warranty

We’re committed to quality, service, and competitive pricing. In the unlikely event of a warranty claim, we offer a straightforward replacement parts policy.

Warranty

  • Workshop Accessories: 1-year parts warranty
  • Hoists purchased after 1 July 2020: 5-year structural warranty (columns, arms & carriages) + 12-month parts warranty
  • Hoists purchased before 1 July 2020: 1-year structural warranty (columns, arms & carriages) + 12-month parts warranty
  • Motorcycle Lifts: 1-year structural and cylinder component warranty. Replacement parts supplied; customer arranges collection or replacement.

Conditions

  • Products must be installed in a permanent enclosed building. Contact us before installing a hoist outdoors. Regular maintenance must be carried out by a competent person in accordance with AS/NZS 1418.1-1.4.1. Products must be kept in a reasonably tidy condition. For full warranty terms based on your purchase date, visit www.happ.com.au/warranty

Need Help?

Technical Questions: 0439 838 477
Other Questions / Freight / Banking: Ph: 0439 833 497 or Email: customerservice@happ.com.au

About HAPP

HAPP was created by car enthusiasts, for car enthusiasts. We’ve been supplying high-quality hoists and workshop equipment across Australia since 2010, with quality and service always guaranteed.