HAPP45Pi: 4.5T clear floor – Inverted direct drive cylinders, Bus. app – SALE $3990!

SAVE $300 NOW.  RRP $4290, while stocks last and new orders only.

YOU ASKED FOR IT, SO WE MADE IT HAPPEN. OUR 4.5T CLEAR FLOOR, DIRECT DRIVE – Inverted Cylinder – CHAIN FREE HOIST.

MADE in HAPPs  SMART FACTORY  with  the LATEST HIGH TECHNOLOGY of Computer Aided Manufacturing (CAM),  Robots for folding and welding of columns, carriages and arms, Computer Numerical Control (CNC)  machining of parts  and  POWDER COATING,  that follow our Queensland  3D aust standard tested models of column, carriage  and robot welded GEN 2 ASYMETRICAL ARMS. This generates the highest precision possible in manufacturing. Take a look at the factory http://happ.com.au/factory

ALL OUR HOISTS ARE GST INCLUSIVE AND COME WITH A FIVE YEAR WARRANTY*

The HAPP 45Pi provides a huge 4.5T lift capacity with a high 3.729m height to the safety bar, making it easier to lift tall vehicles with standard one piece columns.

The lift also uses direct drive cylinders (no chains) which reduces the number of moving parts. As the cylinder seals are on the bottom the seals are more resistant to moisture, this is not an issue typically but if you wash a car down or spray water on the lift, this is a better choice for you than our other hoists.

Features

• Australian Standards Tested and Certified.
• Ready for use in business, Workplace Health and Safety registration kit available.
• Our 3pce and 2pce HAPP precision robot welded higher steel grade Asymmetrical Gen 2.1 arms help you load unusual vehicles and 4wd more easily.  Extended range 580-1140mm and 890-1420mm enable easier centering on lift with access to doors as vehicle can be further back.  (Note: 3pce arms Gen 2.1 for extra load)
• Robot welded column and carriage.
• Robot folded column.
• CNC machined parts.
• This hoist is single point safety release for both columns, so you work everything from the main column.
• Control cables, hoses routed overhead.
• Over height protection.
• Carriages move synchronously, dual hydraulic cylinder drive, stable lifting and lowering, less moving parts.
• Dynamically tested with 125% of rated capacity and static test with 150% of rated capacity by HAPP to Aus Standards.
• CE certified (Europe and USA).
• 5mm thick columns.
• 16mm thick base plate.
• 20mm Tru-bolt design anchor bolts.
• HAPP screw up drop in pad design.
• Australian Standard tested arm locks.
• This hoist is sent out with complimentary r1 car ramps for your low vehicles and 3″ and 4″ adaptors for your 4×4 vehicles, covering most vehicles you are ever going to put on the hoist.
• Lastly, they also have a 15amp plug already attached, taking out the need to bring in an Electrician for initial testing of the lift operation.

Dimensions are informative only, do not pre drill anchor bolts based on drawing

Specifications

Lifting Capacity – 4500kg
Lift height – 1920–2120mm (with pads)
Min pad height – 100mm
Overall height – 3904mm
Overall Width 3430mm
Width between pillars – 2850mm
Rise/Drop Time <50s/>20s
CE approved Hydraulic Power Pack
Motor Power 2.2kw
Plastic powder coat finish
Power supply 3 phase-415v/50hz single phase -240v/50hz15Amp Standard
Power oil pressure 20Mpa

15 amp plug supplied

Gross weight – 720kgs
Net weight – 713kg

Packed weight – 786kg + pump assy

Packed measurements – 385cm x 50cm x 74cm

This hoist comes with our Gen 2 ASYMMETRICAL ARMS  – 3PC 580-1140, 2PC 890-1420

The picture of the hoist top right, is from the Australian Standard Type Test, we are required to test to SWL (4.5T), the picture shows the hoist easily lifting 5.7 tonne and is still within Australian Standard deflection specification. Do no attempt this at home, you are only allowed to lift to SWL (4.5T).
All happ hoists are tested to Australian Standards.

“Important: (BEWARE of inferior imports!) – our quality is superior to our competitors and we have the analytical proof to back it, making us the best hoist option when regarding Australian Standards.  Please do your research!”

EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards.  Our catalogue shows this picture on EVERY CAR LIFT.   BEWARE: Registration with WH&S in states other than Queensland does NOT mean this testing has been done, it merely registers a design.  If the registration doesn’t have an AS prefix it is not to Australian Standards!  

CE certifications ARE NOT recognised in Australia, the CE designs FAILED the structural analysis tests held in Australia by professional engineers. HAPP hoists have been designed to ABOVE Australian Standards the designs are unique to HAPP. Do not believe those who tell you otherwise, we have been supplying workshops and working with professional engineers for many years. Our technical people are qualified engineers and fabricators and our customer service is second to none.  

PRICE:

RRP $4290, currently $3990, save $300 – gst inclusive PLUS Pickup / Delivery (T’s & C’s below)

Pickup / Delivery

We offer competitive freight rates to all Australian states, or you are welcome to pick up yourself from our warehouse in Hendra, or arrange your own freight (there is a $20 warehouse fee on all orders).  To obtain a FREIGHT quote, please contact us direct – Maree on 0439 833497, Jodie on 0452 114277, Karen on 0420 471 855 or email customerservice@happ.com.au for more information.

T’s & C’s

Please note, there is a $20 warehouse fee on all orders, and if paying by credit card, we have to add 1.7% (it goes straight to the ANZ, not us).

Should you have any BANKING questions,  please phone Maree on 0439 833 497, Jodie on 0452 114 277 or email customerservice@happ.com.au for more information.

* Parts warranty

We keep our prices down by reducing un-necessary overheads focusing on quality and service. In the rare occurrence of warranty problems, we offer a no fuss parts replacement warranty on our products.

ALL our hoists now come with a FIVE YEAR structural warranty if purchased after July 1 2020 *** (please visit happ.com.au/warranty/ for exact clarification according to purchase time)

Some of our hoists are supplied with FREE ramps, spacers or drip & tool trays etc – please check our website for the model you are interested in or have purchased to clarify the inclusions.

Specifications are subject to change without notice. Contact HAPP for additional details.

Prices are subject to change without notice.

FULL T&C’S ON THE BOTTOM OF OUR HOME PAGE.

Questions

If you have any TECHNICAL questions, please press the Contact Us button or phone Gavan on 0439 838477.

About HAPP

HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.

Why buy from HAPP??

Check our customer reviews http://happ.com.au/blog/

* We are an Australian owned and operated company with a focus on the best possible quality for reasonable prices.

* We sell mainly by recommendation. To do this we  have personal and professional customer service;  we work with every customer to make sure they are happy with the products they purchase.

* Imported products are typically assembled overseas to keep the costs down. We  have a Qualified Mechanical engineer working for us in China and other engineering inspection companies engaged that inspect our products and partner companies’ quality processes. Inspections typically take place early in production including internal components which are reworked if not up to standard. Critical components are focused on to ensure key products are made correctly.

* We also use the best possible materials in our products. Our clear floor hoists have stainless steel hydraulic lines and our four post hoists have 12+mm solid steel cables tested in Australian NATA registered laboratories. Our synchronisation cables are solid steel and safety latches are billet steel.

* We apply the best designs from our business registered hoists into our home use hoists.  For example, all arms on the two post hoists have the 4T updates, and carriages have the bracing update specified by Australian Engineers for our business hoists.

* We offer an ever increasing range of workshop items allowing customers to source extra items at low cost, many of these items are half the cost of other suppliers – just ask us to email you our catalogue.

* Some hoists are erected in Willow Vale for you to view before placing an order, please contact our friendly team for information.