HAPP One page comparison sheet for ‘ALL’ models
HAPP Selection Chart

HAPP Scissor lifts

HAPP 10 Spec Sheet Single framed 1400mm lift height, cable latch release.
HAPP 11 Spec Sheet Twin runway, 1000mm lift height, electric latch release.
HAPP 12 Spec Sheet Twin runway, 1800mm lift height, electric latch release.

HAPP 4 post lifts

HAPP 25 Spec Sheet 2000mm lift height, triple level safeties.
HAPP 27 Spec Sheet Rigid 5T lift, 1900mm lift height, triple level safeties
HAPP 27 W Spec Sheet HAPP 27 with wheel alignment option

FLOOR PLATE SERIES:

HAPP Precision ‘P’ Asymmetric arms lifts

Load a wider range of vehicles more easily. Made with HAPPs latest Precision technology.

HAPP 30P Spec Sheet Dual point, release safeties on both columns, stays unlocked as going down.
HAPP 35P Spec Sheet Dual point, release safeties on both columns, stays unlocked as going down.
HAPP 70P Spec Sheet 4.5T Single point electric safety release from control side.

Happ80P 70P-E Spec Sheet  4.5T All electric control, single point safety  – currently this model is out of stock

HAPP symmetric arms lifts

Load from either direction, supports similar configurations to previous HAPP models. Made with some of HAPP’s latest technology.

HAPP 80 Spec Sheet Single point electronic control and safety release from control side – currently this model is out of stock

Happ35T Spec Sheet dual point, release safeties on both columns, stays unlocked as going down – currently this model is out of stock

Clear floor gantry style floor series – comparison sheet for all clear floor models included

For all lifts that do not have a floor plate. For a comparison of all gantry style clear floor (using top cross beam) lifts check this document out.
HAPP gantry model lifts

CLEAR FLOOR SERIES:

HAPP Precision ‘P’ Asymmetric arms lifts

Load a wider range of vehicles more easily. Made with HAPPs latest Precision technology.
HAPP 40P Spec Sheet Single point cable operated safety latch. Control lowering with lever on oil tank.
HAPP 45P Spec Sheet Direct drive (no chains), 4.5T Single point cable operated safety latch. Control lowering with lever on oil tank.
HAPP 45Pi Spec Sheet Direct drive (no chains), Inverted cylinder, 4.5T Single point cable operated safety latch. Control lowering with lever on oil tank.
HAPP 60P Spec Sheet Dual point, release safeties on both columns, stays unlocked as going down.

 

NO TOP OR BOTTOM BEAM SERIES:

For a unique HAPP clear floor models with no top cross beam consider the HAPP 90 / 95 below.
HAPP 90 Spec Sheet 2m columns, 1500mm lift, Moveable hoist, clear floor no top cross beam
HAPP 95 Spec Sheet 2.4m columns, 1750mm lift, Moveable hoist, clear floor no top cross beam

Tyre Changers and Wheel Balancers

Tyre changer and Wheel balancer range Spec Sheet