HAPP70P: 4.5T 2 post floor hoist, Gen 2 asymmetric arms – SALE $3590, FREE Parts Carrier!

SAVE $200 on our very popular 4.5T hoist!  Usually $3790

PLUS Current BONUS – PC10 Parts Carrier, valued at $120 when purchasing our Happ70P hoist!  While Stocks Last & new orders only.

While stocks last!



All internal welds are inspected by external quality assurance engineers before powder coating.

As our customers realise, there are certain advantages to both a screw in and drop in pad design. We have worked with the manufacturing plant and now offer as a standard inclusion on all our hoists, a drop in/screw in pad. The screw in pad allows for ease of adjustment and the drop in style allows you to add in spacers to reach those unusual contact points. It is also a multi levelled screw in pad, giving you more height if required. We have also included 2″ and 6″ spacers at no extra charge.


  • Single point safety release, using electric solenoids
  • Lowering is via lever on hydraulic control block providing accurate lowering control.
  • Dual Hydraulic cylinder drive, stable lifting and lowering
  • Chain-driven system
  • Cable and hydraulic load balancing
  • Automatic safety locks
  • Min pad height 100mm
  • Plastic powder coat finish
  • HAPP Australian Standard designs
  • All steel balance cables for equalization, both carriages move synchronously
  • Dynamically tested with 125% of rated capacity and static test with 150% of rated capacity
  • Upgrade from CE certified (Europe and USA) with HAPP Aus Std designs
  • 5mm thick columns
  • 16mm thick base plate
  • 20mm Tru-bolt design anchor bolts
  • HAPP Asymetric Gen2 extra range arms
  • HAPP Screw up drop in pad design
  • HAPP Ultra strong carriage
  • 2” + 6” spacers standard
  • Electronic max height limit switch
  • Access to HAPP customer group buy plan


  • Load Capacity – 4500kgs
  • Lifting Height – 1900mm
  • Overall Height – 2826mm
  • Overall Width – 3446mm
  • Drive through – 2564mm
  • Width between pillars – 2850mm
  • Rise/Drop time – 50s rise / 20s drop time
  • Net weight – 652kg
  • Packed weight – 662kg
  • Packed measurements – 285cm x 76cm x 55cm
  • CE approved Hydraulic Power Pack
  • Motor Capacity – 240V, Single phase
  • Power of motor – 2.2kw
HAPP hoists come standard with steel oil containers where included, Plastic containers as shown can be provided if so desired.
All HAPP hoists have ratchet safety latches in the columns, users only work with vehicles when the mechanical safety latches are engaged allowing safe work at any lift height.

HAPP 70P Asymmetric arms

Front arm: 3pc – 580mm-1140mm

Rear arm: 2pc – 890mm-1420mm

Gen 2 arms

Optional items:

  • Large base floor plate for customers that require additional load bearing size
  • stabilizer bars
  • Low profile car ramps for very low cars
  • Oil drains for cleaner oil change operation
  • Alternate anchor bolts, extra spacers, spare motors
Dimensions are informative only, do not pre drill anchor bolts based on drawing

“Important: (BEWARE of inferior imports!) – our quality is superior to our competitors and we have the analytical proof to back it, making us the best hoist option when regarding Australian Standards.  Please do your research!”

EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards.  Our catalogue shows this picture on EVERY CAR LIFT.   BEWARE: Registration with WH&S in states other than Queensland does NOT mean this testing has been done, it merely registers a design.  If the registration doesn’t have an AS prefix it is not to Australian Standards!  Further information on our home page.

CE certifications ARE NOT recognised in Australia, the CE designs FAILED the structural analysis tests held in Australia by professional engineers. HAPP hoists have been designed to ABOVE Australian Standards the designs are unique to HAPP. Do not believe those who tell you otherwise, we have been supplying workshops and working with professional engineers for many years. Our technical people are qualified engineers and fabricators and our customer service is second to none.  


$3790.  Currently on sale for $3590.00 gst inclusive PLUS Pickup / Delivery (See below)
$200.00 WH&S kit going in to a business
Please note, there is a $20 warehouse fee on all orders, and if paying by credit card, we have to add 1.7% (it goes straight to the ANZ, not us).

Pickup / Delivery

We offer competitive freight rates to all Australian states, or you are welcome to pick up yourself from our warehouse in Hendra, or arrange your own freight (there is a $20 warehouse fee on all orders).  To obtain a FREIGHT quote, please contact us direct – Maree on 0439 833497, Jodie on 0452 114277, Karen on 0420 471 855 or email customerservice@happ.com.au for more information.

T’s & C’s

Please note, there is a $20 warehouse fee on all orders, and if paying by credit card, we have to add 1.7% (it goes straight to the ANZ, not us).

Should you have any BANKING questions,  please phone Maree on 0439 833 497, Jodie on 0452 114 277 or email customerservice@happ.com.au for more information.

** Parts warranty

We keep our prices down by reducing un-necessary overheads focusing on quality and service. In the rare occurrence of warranty problems, we offer a no fuss parts replacement warranty on our products.

ALL our hoists now come with a THREE YEAR structural warranty if purchased after July 1 2020 *** (please visit happ.com.au/warranty/ for exact clarification according to purchase time)

Some of our hoists are supplied with FREE ramps, spacers or drip & tool trays etc – please check our website for the model you are interested in or have purchased to clarify the inclusions.

Specifications are subject to change without notice. Contact HAPP for additional details.

Prices are subject to change without notice.



If you have any TECHNICAL questions, please press the Contact Us button or phone Gavan on 0439 838477.

About HAPP

HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.

Why buy from HAPP??

Check our customer reviews http://happ.com.au/blog/

* We are an Australian owned and operated company with a focus on the best possible quality for reasonable prices.

* We sell mainly by recommendation. To do this we  have personal and professional customer service;  we work with every customer to make sure they are happy with the products they purchase.

* Imported products are typically assembled overseas to keep the costs down. We  have a Qualified Mechanical engineer working for us in China and other engineering inspection companies engaged that inspect our products and partner companies’ quality processes. Inspections typically take place early in production including internal components which are reworked if not up to standard. Critical components are focused on to ensure key products are made correctly.

* We also use the best possible materials in our products. Our clear floor hoists have stainless steel hydraulic lines and our four post hoists have 12+mm solid steel cables tested in Australian NATA registered laboratories. Our synchronisation cables are solid steel and safety latches are billet steel.

* We apply the best designs from our business registered hoists into our home use hoists.  For example, all arms on the two post hoists have the 4T updates, and carriages have the bracing update specified by Australian Engineers for our business hoists.

* We offer an ever increasing range of workshop items allowing customers to source extra items at low cost, many of these items are half the cost of other suppliers – just ask us to email you our catalogue.

* Did you know we now stock items MADE NEARLY ENTIRELY WITH ROBOTICS, THE LASTEST TECHNOLOGY OF CNC MACHINING AND POWDER COATING, AND MADE BETTER BY OUR GEN 2 ASYMMETRICAL ARMS?  Check out one of our models with this new technology and design – https://happ.com.au/hoist_and_lift/happ60p-4t-clear-floor-asymmetical-gen-2-arms/

* Some hoists are erected in Willow Vale QLD, for you to view before placing an order, please contact our friendly team for information.